Wolverine F2D Super Plus User Manual

6
.
Power: Power on/off.
.
Left/Mirror and Right/Flip: Highlight the selection to left/up or
right/down; mirror or flip image in "Convert" mode.
.
Convert/Mode: Convert film to digital image in "Convert" mode.
Press Mode key one time to bring back the previous menu. Press
Mode key twice any time to go back to Home Menu (start menu).
.
OK/Enter key: Confirm and enter the selection
C
OK/Enter
Power
Convert/Mode
Left/Mirror
Right/Flip
Functions of Keys
7
Connect F2D Super Plus to TV Screen to View Images
on TV
If your TV set equipped with RCA composite ports that accept video-in
signal, you can view converted images on TV screen instead from the
F2D Super Plus viewer.
Change your TV set INPUT to appropriate source. Plug the 3.5 mm end
of the RCA cable to TV OUT port located at the back of F2D Super
Plus, and plug RCA end (white or yellow connector) to VIDEO-IN
(yellow) port of the TV set. The viewer of the F2D Super Plus will turn
dark, menu and images will appear only on TV.

Wolverine F2D Super Plus Specifications

General

Brand	Wolverine
Model	F2D Super Plus
Category	Scanner
Language	English