14
8. Clean Film Dust and Insert Proper Adapter into Slot
For best results, use included cleaning brush with felt side down to
wipe dust off the light table gently before inserting adapter.
Insert
film Adapter with two stick-out stoppers face down or the
embossed wording face up, push it into the right side slot, right to
left.
Gently i
nsert and push Adapter until stopped. If adapter was
inserted
upside down or in improper direction, it would be stuck inside the
F2D Super Plus. If the adapter was stuck, please call us or go to our
15
web site for the solution on video,
refer to item 4, how to release a
stuck slide adapter if inserted
upside down, refer to page 4.
U
se fine soft cloth or canned air (not included) to wipe or blow off
any dust on the film before feeding them into the Adapter. Gently
feed the film from the right side of adapter.
In general, feed the film in right side up, and shiny side up as
follows:
Slides: printed logo or brand name facing down
Super 8: perforated holes at top
9. Prepare Film and Feed the Film into Adapter
To Next Page
Loading...
Need help?
General
