Worcester MT10RF User Manual

13
USER INSTRUCTIONS
8 716 115 752 (2009/07)
SELECTING PROGRAMS
5. Move the selector switch [L] to set:
Automatic, Comfort or Economy.
– Automatic (switches between and uses
both Comfort and Economy temperature
settings according to the tappets).
– Constant Comfort (continuously on
using Comfort temperature setting).
– Constant Economy (continuously on
using economy temperature setting).
Fig. 21 Selecting programs
6. Replace cover [D] when finished.
5.2 RECEIVER FUNCTIONS
5.2.1 NORMAL OPERATION
B LED [A] is continuously on when there is a
demand for heating and continuously off when
there is no demand for heating.
Fig. 22 Normal operation
5.2.2 SIGNAL RECEIVER
B LED [A] flashes twice each time a signal is
received from the transmitter.
Fig. 23 Signal received
5.2.3 LOW BATTERY STATE
B LED [A] flashes slowly, on for one second and
off for one second.
B Replace the transmitter batteries as shown
under “Battery replacement” section and the
receiver will revert back to normal operation.
Fig. 24 Low battery state
1
2
3
4
5
5
L
8716115752-23.1 Wo
PWFSSJEF
PWFSSJEF
"
-PX#BUUFSZ
$PNGPSU
&DPOPNZ

"
-PX#BUUFSZ
$PNGPSU
&DPOPNZ

"
TFD TFD

Worcester MT10RF Specifications

General

Brand	Worcester
Model	MT10RF
Category	Thermostat
Language	English