Operation
2–14 975-0170-01-01
Faults and Warnings
A fault affects the operation of the unit. A manual fault requires user
intervention by clearing the condition and then pressing the Reset button
on the inverter/charger’s front panel. See the System Control Panel
Owner’s Guide for information on clearing faults from the System
Control Panel.
A warning alerts you to a condition that could possibly affect operation of
the unit.
See “Faults and Warnings” on page 4–2 for more explanation on the
difference between faults and warnings.
Monitoring Status Messages on the System Control Panel
Refer to “System Menu Map” on page 3–3 of the Configuration chapter.
Bulk Green RS3000 is in bulk mode of battery
charging.
These lights indicate which
state of charge the RS3000 is in.
Absorption Green RS3000 is in absorption mode of
battery charging.
Float Green RS3000 is in float mode of battery
charging. The Float light
illuminates in three-stage charging.
Equalize Yellow RS3000 is in equalize mode of
battery charging.
Table 2-2
Front Panel Lights
Light Illuminated Color Status Action or Status Item
To Next Page
Loading...
Need help?
General