Configuration
3–18 975-0170-01-01
RS3000 Menu (Advanced)
The advanced menu lists settings that provide you with additional control
over RS3000. However, you may not have to adjust these settings as part
of regular operation. For a listing of advanced menu items, see “RS3000
Menu Structure — Overview” on page 3–9.
In addition to several items from the basic menu, the RS3000 advanced
menu contains the following sub-menus and commands:
• Configure Inv/Chg (Configure Inverter/Charger)
• View Device Info
When you select a sub-menu and press Enter, a list of menu items
appears.
These settings are only visible if Advanced Menu is selected. To select the
RS3000 Advanced Menu, see “Selecting the RS3000 Advanced Menu”
on page 3–6.
This section describes the menu items in detail. Each item is described as
a display or configurable setting, when to use the setting, and the outcome
of changing a setting.
Inverter
This feature is the same as described on the basic menu on page 3–12.
Charger
This feature is the same as described on the basic menu on page 3–12.
Power Share
This feature is the same as described on the basic menu on page 3–13.
Configure Inv/Chg (Configure Inverter/Charger)
Cfg Inv/Chg is a sub menu command. If you select this item, you’ll access
a list of sub-menu items. See “Configure Inv/Chg Menu (Configure
Inverter/Charger Menu)” on page 3–20.
To Next Page
Loading...
Need help?
General