30 •Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM
Powering off the System
To power off the WIDE FORMAT COPY SYSTEM, do the following:
1. Power off the Controller and the Printer.
• For the 8825/8830/8850/510 Series, switch the Circuit Breaker
Switch to the Off (O) position. Then switch the Printer Switch to
the Off (O) position.
• For the 721P, first power off the Printer. Then power off the
Controller.
2. Switch off the Scanner by pressing the Power On/Off Switch on
the back of the Scanner to the Off (O) position as shown below.
To Next Page
Loading...
Need help?
General