Xerox 8825 User Manual

XEROX WIDE FORMAT COPY SYSTEM Special features keys • 65
Finisher key
A finishing device, such as a folder, can be connected to the WIDE
FORMAT COPY SYSTEM If such a device is connected, the Finisher
key enables or disables that device.
To enable/disable a finishing device:
1. Press the Finisher key. The Finisher indicator lamp illuminates
and the FINISHER menu screen are displayed. The black
arrows indicate that the menu contains more options than are
visible. The selected option is highlighted.
FINISHER
FOLD PROGRAM
TITLE BLOCK LOCATION
OUTPUT BIN
OVERLENGTH OPTION
TAB OPTIONS
NOTE: If no finishing device is connected, pressing the Finisher key
produces the error message shown below.
FINISHER
FINISHER OPTION
IS NOT AVAILABLE
When a set is being built, the finisher options cannot be changed and
pressing the Finisher key is invalid. The error screen shown below is
displayed. Enable the finisher and select the finisher options either
before selecting the Sets Build option or after the set has been built.
FINISHER
FINISHER OPTION CANNOT BE CHANGED
DURING SETS BUILD OPERATION
For either error screen, press the Exit key to return to the READY
screen. The Finisher indicator lamp is extinguished
2. Press the Previous or Next key to scroll through the list of
options.
3. When the desired option is highlighted, press the Enter key to
select the option. The screen for the selected option is
displayed. See Finisher menu options below and on the next

Xerox 8825 Specifications

General

Brand	Xerox
Model	8825
Category	Printer
Language	English