Xerox CopyCentre C20 User Manual

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 6-7
Fax
Manual group dialing
z Use to manually program a broadcast
send to multiple destinations.
¾ Load the originals and select [Fax].
¾ Press [Manual Group].
The display requests a destination fax number.
¾ Enter the first fax number and press [Enter].
¾ ’Another No.?’ displays. Select [Yes] to add another number
and press [Enter].
¾ Repeat the procedure until all numbers have been entered.
Then select [No] and press [Enter].
The originals are scanned and faxed to the destinations
entered.
Manual Dialing
z Use to dial the fax number with the
telephone line open.
¾
Load the originals and select [Fax].
¾ Press [Manual Dial].
The dial tone is audible and the LCD displays ’Phone’.
¾ Dial the fax number. When the fax tone is heard, press [Start] to
begin faxing.
Redial
z Numbers which have already been
entered recently can be quickly
accessed using the Redial function.
¾ Load the originals and select [Fax].
¾ Press [Pause/Redial].
The last number is automatically dialled and the originals are
scanned and faxed.
¾ Load the originals and select [Fax].
¾ Press [Pause/Redial] for approximately 2 seconds.
The Redial Memory in the machine retains the last 10 numbers
dialled.
¾ Using the Navigation Keys, select the number required and
press [Enter].
¾ Press [Start] to dial the number. The fax is automatically
scanned and sent.
Downloaded From ManualsPrinter.com Manuals

Xerox CopyCentre C20 Specifications

General

Brand	Xerox
Model	CopyCentre C20
Category	All in One Printer
Language	English