Xerox CopyCentre C20 User Manual

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 6-11
Fax
Memory Fax
z Use to send a
fax from
memory.
No. Used to enter the fax
phone number for the
remote machine.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
and press [Enter].
¾ Select [Memory Fax] and press [Enter].
¾ Enter the fax number for the remote machine.
Press [Enter].
¾ Another No? displays, if required enter another
number and press [Enter].
¾ When all the numbers have been entered the
originals are scanned and stored in memory. The
fax is then sent from memory.
Delay Fax
z Use to set a
specific time for
sending your
fax.
- ¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
and press [Enter].
¾ Select [Delay Fax] and press [Enter].
¾ Enter the fax number using the Numeric Keypad
or Speed Dial, and press [Enter]. Enter another
number if required. When all numbers have been
entered select [No] and press [Enter].
¾ Enter a name for the job and press [Enter].
¾ The displays shows the current time, enter a time
for the delay fax and press [Enter].
If you set a time earlier than the current time, the
job will be sent at that time the following day.
The originals are scanned into memory ready for
sending.
Downloaded From ManualsPrinter.com Manuals

Xerox CopyCentre C20 Specifications

General

Brand	Xerox
Model	CopyCentre C20
Category	All in One Printer
Language	English