Xerox CopyCentre C20 User Manual

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-3
Copy
)
When copying onto a paper size smaller than A4/Letter, the printed image may be offset and not
reproduce correctly, even when Auto Fit is selected.
Load the Originals
Document Feeder:
L Up to 50 sheets of 80 g/m
2
(20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m
2
(12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier
Specifications” on page 12-5 for full Document Feeder specifications.
¾
If the Bypass Tray is selected the
Paper Type option displays. Use
the Navigation Keys to select the
Paper Type being loaded and
press [Enter].
If using the Bypass, remember to
load the required stock.
Enter
Navigation Keys
3
Document
Guides
¾ Remove all staples and paper
clips prior to loading.
¾ Adjust the sliding document
guides to the size required.
¾ Insert the originals neatly into the
Document Feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
¾ Align the stack with the left and
rear edges of the tray. Adjust the
guides to just touch the edges of
the originals.
Downloaded From ManualsPrinter.com Manuals

Xerox CopyCentre C20 Specifications

General

Brand	Xerox
Model	CopyCentre C20
Category	All in One Printer
Language	English