Xerox CopyCentre C20 User Manual

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-5
Copy
Enter the Quantity
z The maximum
copy quantity is
999.
z You can cancel a
copy job while it is
copying by
pressing the
[Stop] key twice.
Press Start
5
Numeric Keypad
Clear/Clear All
¾ Use the Numeric Keypad to enter
the number of copies required.
¾ If necessary, press [Clear/Clear
All] to clear the current quantity
and enter a new quantity.
6
¾ Press [Start] to begin the copy
job.
¾ If Collated is On, when the
document is fed from the
Document Glass, the display
shows [Scan Another?].
¾ To scan another original, load the
next original and using the
Navigation Keys select [Yes] and
press [Enter].
Continue the procedure until all
the originals have been scanned.
¾ Select [No] when all the originals
have been scanned, and press
[Enter].
Printing commences and copies
are delivered to the Output Tray.
Navigation Keys Start
Downloaded From ManualsPrinter.com Manuals

Xerox CopyCentre C20 Specifications

General

Brand	Xerox
Model	CopyCentre C20
Category	All in One Printer
Language	English