EasyManuals Logo
Home>Xerox>Printer>Phaser 3600

Xerox Phaser 3600 User Manual

Xerox Phaser 3600
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
Installing Printer Software in Windows
7
Installing Software for Network Printing
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
You can install the printer software using the typical or custom
method.
Typical Installation
This is recommended for most users. All components necessary
for printer operations will be installed.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click
Start
and
then
Run
. Type
X:\Setup.exe
, replacing “
X
” with the
letter which represents your drive and click
OK
.
If you use Windows Vista, click
Start
All programs
Accessories
Run
, and type
X:\Setup.exe
.
If the
AutoPlay
window appears in Windows Vista, click
Run
Setup.exe
in
Install or run program
field, and
click
Continue
in the
User Account Control
window.
3
Click
Install Software
.
4
Select
Typical installation for a network printer
. Click
Next
.
5
The list of printers available on the network appears. Select the
printer you want to install from the list and then click
Next
.
• If you do not see your printer on the list, click
Update
to
refresh the list, or select
Add TCP/IP Port
to add your
printer to the network. To add the printer to the network,
enter the port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print
a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared
Printer [UNC]
and enter the shared name manually or find
a shared printer by clicking the
Browse
button.
NOTE
: If you cannot find your machine in network, please turn
off the firewall and click
Update
.
For Windows operating system, click
Start
Control Panel
and start windows firewall, and set this option unactivated. For
other operating system, refer to its on-line guide.
6
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click
Next
.
Otherwise, just click
Next
and skip to step 8.
7
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
8
Click
Finish
.

Table of Contents

Other manuals for Xerox Phaser 3600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 3600 and is the answer not in the manual?

Xerox Phaser 3600 Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution600 x 600 DPI
Warm-up time (from sleep mode)31 s
Print speed (black, normal quality, A4/US Letter)38 ppm
Internal memory32 MB
Maximum internal memory512 MB
Total input capacity600 sheets
Total output capacity250 sheets
Maximum input capacity1100 sheets
Paper tray 2 input capacity500 sheets
FunctionsPrint
I/O portsParallel (IEEE 1284), USB 2.0
Device managerDHCP, Xerox CentreWare Internet Services Embedded Web Server, Xerox CentreWare Printer Management for Microsoft, Novell, and UNIX
Package length563.87 mm
Depth (imperial)18.8 \
Width (imperial)15.7 \
Height (imperial)15.1 \
Power requirements240 V, 50/60 Hz
Standard input trays2
Print memory (standard)64 MB
Power consumption (active)700 W
Compatible operating systemsHP-UX 10.2, Linux, Mac OS X ver.10.2 Red Hat 9, SCO, SUSE 9, Solaris 2.5.1/2.6+, Windows 2000/Vista
Acoustic power emissions (standby)35 dB
Standard output capacity for envelopes8000 sheets
Acoustic power emissions (active, print, copy or scan)56 dB
PCL fonts68
CertificationCE, UL 60950-1/CSA 60950-1-03, FCC Part 15 Class A, 73/23/EEC, RoHS 2002/95/EC
Maximum duty cycle200000 pages per month
Recommended duty cycle8000 pages per month
Number of PostScript fonts136
Power consumption (standby)13 W
Power consumption (PowerSave)130 W
Export Control Classification Number (ECCN)EAR99
Weight and Dimensions IconWeight and Dimensions
Depth478 mm
Width399 mm
Height383 mm
Package width515.61 mm
Package height584.19 mm
Package weight21201.2 g
Dimensions (WxDxH)399 x 462 x 383 mm

Related product manuals