Installing and Configuring the PostScript Driver on Linux 35
NOTE: When activating a computer that is switched on and connected to the printer
by USB or parallel cable, the printer name is displayed after [USB Printer #1] or
[Parallel Port #1]. Select them.
“1” of “#1” may differ according to the environment used.
2.
Select [Xerox] from [Make], and click [Continue].
3. Select the driver to be used from [Model], and click [Continue].
4. Check that the next message is displayed in the following screen.
The print queue is created.
To Next Page
Loading...
Need help?
General