Setting the ESC/P Mode 69
7 Setting the ESC/P Mode
Control Panel Menus
There are two types of control panel menus: the mode menus and common menus.
The mode menus are the menus that relate to the emulation modes. The common
menus are the menus for all the other features of the printer.
Common Menu Items for the ESC/P Mode
The common menu items that relate to the ESC/P emulation mode are as follows:
Reference: For more information about the common menu items, refer to the 'User
Guide'.
Network / Port
To display this item, select [Admin Menu] > [Network / Port].
This item allows you to set the ports to be used in the ESC/P emulation mode.
• Port Status (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)
Enables the ports to be used in the ESC/P emulation mode. By default, all ports
are set to [Enable].
• Print Mode (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)
Sets the print mode of each port to [ESC/P] or [HexDump]. By default, all ports
are set to [Auto].
NOTE: [Print Mode] allows you to set the method of processing data received from host
interfaces. If you set this to [ESC/P], the printer will not auto-switch languages.
Press the <Menu> button
Common Menus Mode Menus
ESC/P
extension
menu items
PCL
extension
menu items
PostScript
extension
menu items
To Next Page
Loading...
Need help?
General