70 Setting the ESC/P Mode
Delete Form
To display this item, select [Admin Menu] > [Init/Del Data] > [Delete Form].
This item allows you to delete ESC/P forms registered in the printer. If there is no
form registered in the printer, [Not registered] appears instead of [Delete Form].
• Delete ESCP Form
Deletes ESC/P forms registered in the printer.
ESC/P Mode Menu
The ESC/P mode menu allows you to configure the ESC/P emulation mode.
The settings of the ESC/P mode menu can be modified even when the printer is
printing. The changes you made, however, will be applied not to the job being
printed, but from a job after it.
The mode menu is organized into the following structure:
mode menu > menu items > items > optional values
NOTE: Some "menu items" do not have items.
Some "items" may be divided into item 1, item 2, item 3...
(They will be simply referred to as "items" unless otherwise noted.)
The above is a portion of the hierarchical structure of the ESC/P mode menu.
Reference: For information about the setting items of the ESC/P mode menu, refer to
"Setting the ESC/P Mode Menu" (P. 71).
ESC/P Features Menu Paper Tray Auto
Tray 1
Tray 2
Output Size A4
A3
A5
Document Size Portrait
Landscape
A4 Portrait
Stored Prog.Menu At startup Factory Defaults
No.01 - 05
Retrieve Factory Defaults
No.01 - 05
Mode Menu Menu Items Items Optional Values
To Next Page
Loading...
Need help?
General