Xerox Phaser 7400 User Guide

Choosing Output Options
Phaser® 7400 Color Printer
3-53
Stapling Output
If your printer has a finisher, you can have each set of copies stapled. Stapled output is
delivered to the finisher output tray. Stapling is supported for the following paper sizes and
weights:
■ Paper up to 305 mm (12 in.) wide
■ Paper within the weight range 64–120 g/m
2
(17–31 lb. Bond, 24–43 lb. Cover)
Stapling is not supported for specialty media including envelopes, transparencies, glossy
paper, and labels.
Stapling Options
The following stapling options are available from the printer driver:
■ None (Factory default): Print copies are not stapled.
■ Front: Inserts one staple in each set of copies. Up to 50 sheets can be stapled.
■ Rear: Inserts one staple in each set of copies. Up to 50 sheets can be stapled.
■ Dual: Inserts two staples in each set of copies. Up to 50 sheets can be stapled. The stapled
edge must be at least 148 mm (5.83 in.) long.
■ Saddle: Staples and folds each set of copies along the center line. Up to 10 sheets can be
folded and stapled.
The Booklet option in the printer driver can be used with the Saddle stapling option to
print, staple, and fold the sheets into a booklet. For information about printer driver
options, see the Advanced Features Guide at www.xerox.com/office/7400support
.
Front, Rear, and Dual stapled copies are sent to the finisher upper output tray. Saddle stapled
copies are sent to the finisher lower output tray.
Staple Orientation
The sample image in the printer driver shows the location of the staples, which changes
depending on the orientation of the page and the paper feed direction (long-edge or short-edge
feed).
See also:
Loading Paper on page 3-8

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm