Installing the Printer Drivers
Phaser® 8560/8860 Printer
2-10
Windows 2000 or Later
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch,
do the following:
a. Click Start, and then click Run.
b. In the Run window, type: <CD drive>:\INSTALL.EXE.
2. If necessary, select your desired language from the list.
3. Select Install Printer Driver.
4. Select the installation method you want to use, and then follow the onscreen instructions.
See also:
For the Phaser 8560 printer:
Advanced Features Guide at www.xerox.com/office/
8560Psupport
Online Support Assistant at www.xerox.com/office/8560Psupport
For the Phaser 8860 printer:
Advanced Features Guide at www.xerox.com/office/8860support
Online Support Assistant at www.xerox.com/office/8860support