Loading Paper
Phaser® 8560/8860 Printer
3-9
Loading Paper
This section includes:
■ Loading Paper in Tray 1 on page 3-9
■ Using Manual Feed on page 3-16
■ Loading Paper in Tray 2, 3, or 4 on page 3-17
Loading Paper in Tray 1
Use Tray 1 for a wide range of media types including:
■ Plain paper, letterhead, colored paper, and pre-printed paper
■ Card stock
■ Labels
■ Envelopes
■ Transparencies
■ Specialty media (including business cards, photo paper, postcards, pre-punched paper,
duradocument paper, and trifold brochures)
■ Pre-printed paper (paper already printed on one side)
■ Custom size paper
See also:
Supported Paper Sizes and Weights for Tray 1 on page 3-6
Printing on Specialty Media on page 3-31
Note: If you change the paper in Tray 1, select the correct paper type and size on the control
panel.
The media capacity for Tray 1 is:
■ 100 sheets of plain paper (20 lb. Bond)
■ 50 sheets of transparencies, glossy paper, or labels
■ 10 envelopes