Printing on Both Sides of the Paper
Phaser® 8560/8860 Printer
3-27
Printing on Both Sides of the Paper
This section includes:
■ Automatic 2-Sided Printing on page 3-27
■ Manual 2-Sided Printing on page 3-29
See also:
Online Support Assistant at www.xerox.com/office/8560Psupport
or www.xerox.com/
office/8860support
Automatic 2-Sided Printing
Automatic 2-sided printing is available from all trays in the Phaser 8860 model and
Phaser 8560DN, Phaser 8560DT, and Phaser 8560DX configurations. Before printing a 2-
sided document, verify that the paper is a supported size and type for the tray.
■ For a list of supported paper sizes, see Supported Paper and Media on page 3-3.
■ For a list of paper types and weights, print the Paper Tips page on the control panel:
a. Select
Information, and then press the OK button.
b. Select
Information Pages, and then press the OK button.
c. Select
Paper Tips Page, and then press the OK button.
The following specialty media should not be used for 2-sided printing:
■ Transparencies
■ Envelopes
■ Labels
See also:
Supported Paper and Media on page 3-3
Printer Configurations on page 1-4