@Xi Computer Corporation MTower User Manual

Chapter 2, Getting Started
Page 12
Figure 2-2. Back of ATX Computer Systems
Connecting the Monitor
The following procedure describes how to connect the monitor to your computer.
When performing these steps, refer to Figure 2-1 on page 11 or Figure 2-2, above.
1. Verify that the monitor power switch is turned off.
2. Connect the monitor cable to the monitor. If you need assistance, consult the
monitor manual supplied with your computer. (Skip this step is the monitor
cable is already attached to the monitor.)
3. Locate the monitor connect on the system unit and attach the other end of the
monitor cable to that connector.
Phone
Line
Monitor
Mouse
Keyboard
Printer
Speakers
Power
Joystick

@Xi Computer Corporation MTower Specifications

General

Brand	@Xi Computer Corporation
Model	MTower
Category	Desktop
Language	English