Revision History
The following table shows the revision history for this document.
Section Revision Summary
02/05/2021 Version 1.8
General Updated example output logs to reflect Alveo U250-2RP
platform.
Chapter 1: Introduction Updated platform information and introduced DFX
terminology.
XRT and Deployment Platform Installation Procedures on
RedHat and CentOS
Updated installation steps, as well as added an additional
step to program the shell partition.
XRT and Deployment Package Installation Procedures on
Ubuntu
Updated installation steps, as well as added an additional
step to program the shell partition.
Appendix B: Creating a Vault Repository for CentOS Clarified description.
11/24/2020 Version 1.7
Chapter 1: Introduction Updated platform information.
Card Features Added network interface information, updated electrical
design power, as well as HBM and DDR4.
Minimum System Requirements Updated operating system.
Card Interfaces and Details Clarified description.
XRT and Deployment Platform Installation Procedures on
RedHat and CentOS
Updated installation steps for the Alveo U200 and U250
cards.
XRT and Deployment Package Installation Procedures on
Ubuntu
Running lspci Updated output log.
Running xbmgmt flash --scan Updated description.
Running xbmgmt partition Added section.
xbutil validate Updated description and removed note about XRT
installation on Ubuntu.
Upgrade
Updated to reflect 2020.2 XRT.
Downgrade
Upgrade
Downgrade
Upgrade from 2018.2 to 2018.3 in RedHat and CentOS
Removed sections.
Downgrade from 2018.3 to 2018.2 in RedHat and CentOS
Upgrade from 2018.x to 2019.1 in RedHat and CentOS
Downgrade from 2019.1 to 2018.x in RedHat and CentOS
Upgrade from 2018.2 to 2018.3 in Ubuntu
Downgrade from 2018.3 to 2018.2 in Ubuntu
Upgrade from 2018.x to 2019.1 in Ubuntu
Downgrade from 2019.1 to 2018.x in Ubuntu
Generating the xbmgmt flash --update Command
Revision History
UG1301 (v1.8) February 5, 2021 www.xilinx.com
Getting Started with Alveo Accelerator Cards 2
To Next Page
Loading...
Need help?
General
