Xilinx Alveo U200 User Manual

Chapter 5
Card Bring-Up and Validation
Aer installing the XRT and deployment plaorm, the card installaon can be veried using the
following commands, which are explained in more detail below.
• lspci
• xbmgmt flash
• xbmgmt partition
• xbutil validate
The lspci Linux command is used to conrm the card, is seen by the OS, as was done when
installing the card.
The addional commands use the xbmgmt and xbutil ulies included during the XRT package
installaon. These ulies include mulple commands to validate and idenfy the installed
card(s) and report addional card details including memory, PCIe
®
, plaorm name, and system
informaon. See Vis Unied Soware Plaorm Documentaon: Applicaon Acceleraon
Development (UG1393) for a detailed list of commands.
Set the environment to use the ulies by running the following command. Note that the
command is dependent on the command shell you are using.
Use the following command in csh shell:
$ source /opt/xilinx/xrt/setup.csh
Use the following command in bash shell:
$ source /opt/xilinx/xrt/setup.sh
Running lspci
1. Enter the following command:
$ sudo lspci -vd 10ee:
Chapter 5: Card Bring-Up and Validation
UG1301 (v1.8) February 5, 2021 www.xilinx.com
Getting Started with Alveo Accelerator Cards 29
Send Feedback

Xilinx Alveo U200 Specifications

General

Brand	Xilinx
Model	Alveo U200
Category	Computer Hardware
Language	English