Xilinx SP701 User Manual

Chapter 2
Board Setup and Configuration
Electrostatic Discharge Caution
CAUTION! ESD can damage electronic components when they are improperly handled, and can result in total or
intermient failures. Always follow ESD-prevenon procedures when removing and replacing components.
To prevent ESD damage:
• Use an ESD wrist or ankle strap and ensure that it makes skin contact. Connect the equipment
end of the strap to an unpainted metal surface on the chassis.
• Avoid touching the adapter against your clothing. The wrist strap protects components from
ESD on the body only.
• Handle the adapter by its bracket or edges only. Avoid touching the printed circuit board or
the connectors.
• Put the adapter down only on an anstac surface such as the bag supplied in your kit.
• If you are returning the adapter to Xilinx
®
Product Support, place it back in its anstac bag
immediately.
Board Components
The following gure shows the SP701 board component locaons. Each numbered component is
keyed to the table in Board Component Locaon.
IMPORTANT! The following gure is for visual reference only and might not reect the current revision of the
board. There could be mulple revisions of this board. The specic details concerning the dierences between
revisions are not captured in this document. This document is not intended to be a reference design guide and the
informaon herein should not be used as such. Always refer to the schemac, layout, and XDC les of the specic
SP701 version of interest for such details.
UG1319 (v1.0) July 12, 2019 www.xilinx.com
SP701 Board User Guide 9
Send Feedback

Xilinx SP701 Specifications

General

Brand	Xilinx
Model	SP701
Category	Motherboard
Language	English