8
4. Panel Operation
This chapter mainly introduces the operation of digital manipulator and its
application. The digital manipulator can set parameters and run the motor. We suggset
users use the digital manipulator when reading this chapter.
4-1．Basic operation
This section mainly introduces some basic operation about how to set running
condition.
4-1-1．Panel function
The panel can set parameters, such as display, run and status.
4 bit digital display: display status and parameters of driver, alerting signal.
POWER indicator: lights when control circuit power on
CHARGE indicator: lights when main circuit power on. As main circuit
capacitor remains charge after cutting off the power, the capacitor still shine
and do not touch driver wiring at this time.
Take the initial status of the panel as example:
Short press: status switch, status return
Short press: increase displaying data; Long press: increase
displaying data continuously
Short press: decrease displaying data; Long press: decrease
displaying data continuously
Short press: shift bit; Long press: enter data set and check
4-1-2．Switch between basic status
Basic status includes display status, monitor status, auxiliary function status,
parameter set status and alarm status (visible only when error occurs). After clicking
STA|ESC, the following statuses switch in proper order:
To Next Page
Loading...
Need help?
General