51
of the corresponding cylinder so as to more accurately control or
correct cylinder injection quantity.
After the ECU or injector is replaced, injector code of each cylinder
must be confirmed or re-coded so that the cylinder can better
identify injectors to accurately control fuel injection.
After cleaning, generally there is no need to do the coding matching function.
The identification of the fuel injector includes its working accuracy value and type value.
When replacing it, you need to find the corresponding model for replacement.
At present, mainstream cars support injector coding function
GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you need
to use the gearbox matching function to re-match the engine and
the gearbox.
*Cautions!
Before resetting the gearbox, please check the gearbox control unit
to ensure that there is no fault code. If there is a fault code, the
gearbox memory function cannot be reset. Please road test after
reset.
SUSPENSION
This function can adjust the height of the vehicle body. When
replacing the body height sensor in the air suspension system, or
control module or when the vehicle level is incorrect, you need to
To Next Page
Loading...
Need help?
General
