52
perform this function to adjust the body height sensor for level
calibration.
The air suspension system reset function enables the tablet ECU to
match the current air suspension system information, thereby
ensuring the normal damping effect of the vehicle when driving.
Application scenarios:
The shock absorber is not the same height due to air leakage,
maintenance, replacement, etc.;
After replacing the air pump assembly;
After replacing the electronic control module.
WINDOWS INITIALIZATION
This function is to match the windows to restore the initial memory
of the ECU and restore the automatic raising and lowering functions
of the power window. Usually when the vehicle window fails or after
replacing the window glass, we need to use this function to initialize
the car window.
SEAT CALIBRATION
This function is suitable for the matching of replacement and
maintenance seats with memory function. After the seat fails or is
replaced or repaired, it is generally necessary to use this function to
match the seat.
Needed for cars with seats with memory function, general gasoline cars don’t need.
To Next Page
Loading...
Need help?
General
