Yaber Pico T1 User Manual

1. Connect the power bank and Yaber Pico T1 with a Type C cable-press the power button of
the power bank-press the power button of the projector.Or Connect the Charger and Yaber
Pico T1 with a Type C cable-Plug the Charger into a power socket-Press the power button of
the projector.
2. Use the focus function of the projector to get the best image performance.(If it is still blurry,
please try to adjust the projection distance.)
3. Use the keystone function of the projector to get a rectangle projection screen.
4. Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player, Computer, etc.)
in the corresponding interfaces of the projector, please be sure to select the corresponding
source. If you do not select the correct source, the projector will not be able to detect the
signal.
5. Select the " " menu,enter the [ Other Setting ],then you can select the option [ Language
Setting ] to set your preferred language.
Starting Projector
Image Adjustment
1. Focus Adjustment
When using the projector for the first time, it normally displays an unclear image. This is due
to the lens being out of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:
Focus
01 02
03 04 05 06
07
08 09 10 11 12
13 14 15 16

Yaber Pico T1 Specifications

General

Brand	Yaber
Model	Pico T1
Category	Projector
Language	English