Yaesu FT-2DR User Manual

FT2DR/DE Technical Supplement
Specications
SPECIFICATIONS-1
General
Frequency Range:
A Band RX
0.52 - 1.71 MHz (AM Radio)
1.8 - 30 MHz (SW Radio)
30 - 76 MHz (USA version)
30 - 88 MHz (EXP/EU version)
76 - 108 MHz (USA version)
88 - 108 MHz (EXP/EU version)
108 - 137 MHz (Air Band)
137 - 174 MHz (144 MHz HAM)
174 - 222 MHz (VHF Band)
222 - 420 MHz (GEN1)
420 - 774 MHz (USA version)
420 - 800 MHz (EXP/EU version)
803 - 999 MHz (GEN2, Cellular Blocked: USA version)
800 - 999 MHz (GEN2: EXP/EU version)
B Band RX
108 - 137 MHz (Air Band)
137 - 174 MHz (144 MHz HAM)
174 - 222 MHz (VHF Band)
222 - 420 MHz (GEN1)
420 - 470 MHz (430 MHz HAM)
470 - 580 MHz (UHF Band)
TX
144 - 146 MHz or 144 - 148 MHz
430 - 440 MHz or 430 - 450 MHz
Channel Spacing: 5, 6.25, 8.33, 9, 10, 12.5, 15, 20, 25, 50, 100 kHz
(8.33 kHz: only for Air Band, 9 kHz: only for AM Radio)
Frequency Stability: ±2.5 ppm (–4 °F to +140 °F [–20 °C to +60 °C])
Emission Type: F1D, F2D, F3E, F7W
Supply Voltage: Nominal: 7.2 V DC, Negative Ground SBR-14LI
Nominal: 7.4 V DC, Negative Ground FNB-101LI
Operating: 4 - 14 V, Negative Ground (EXT DC JACK)
11 - 16 V, Negative Ground (EXT DC JACK with SDD-13)
Current Consumption: 120 mA (Mono band Receive)
180 mA (Dual band Receive)
80 mA (Mono band Receive, Standby)
110 mA (Dual band Receive, Standby)
50 mA (Mono band Receive, Standby, Saver On “Save Ratio 1:5”)
50 mA (Dual band Receive, Standby, Saver On “Save Ratio 1:5”)
+20 mA (GPS On)
+20 mA (Digital)
400 μA (Auto Power O)
1.6 A (5 W TX, 144 MHz 7.2 V DC)
1.8 A (5 W TX, 430 MHz 7.2 V DC)
Operating Temperature: –4 °F to +140 °F (–20 °C to +60 °C)
Case Size (W x H x D): 2.4” x 4.3” x 1.3” (62 x 110 x 32.5 mm)
(w/ SBR-14LI, w/o knob, antenna and belt clip)
Weight: 10.93 oz (310 g) (with SBR-14LI and Antenna)

Yaesu FT-2DR Specifications

General

Brand	Yaesu
Model	FT-2DR
Category	Transceiver
Language	English