Yaesu FTA-250L User Manual

FTA-250L OperATing MAnuAL 13
Using comm mode
Adjusting the frequency

Press the
[
DWN
]
or
[
UP
]
key to adjust the fre-
quency.

Use the numeric keypad
to enter the frequency.
For example, to set 134.35 MHz,
press
[
1
]
à
[
3
]
à
[
4
]
à
[
3
]
à
[
5
]
.
To set 118.275 MHz, it is not necessary to enter the
nal “5” in the frequency as below:
[
1
]
à
[
1
]
à
[
8
]
à
[
2
]
à
[
7
]
.
To set 120.000 MHz, press and hold the “2” key but-
ton, it is not necessary to enter the “0”s;
[
1
]
à
press and hold
[
2
]
.
z The frequency input may be canceled by pressing the
PTT switch before completing the entry.
z Register frequently used frequencies into the memory
channels. The memory channel may be easily recalled
for later use. (page 14).
Using memory mode
How to enter memory channels
Each memory channel can be given a name of up to
7 characters.
The memories can be divided into 9 groups (1 to 9).
Memory channels can be categorized and managed
as necessary.
1. In COMM mode, turn to
the frequency to be writ-
ten to memory.
2. Press and hold the
[
ENT
]
key.
The group number and
unused vacant channel
number ashes.
To change the group number, press the
[
GROUP
]
key.
To change the channel number, press the
[
DWN
]
or
[
UP
]
key.

Yaesu FTA-250L Specifications

General

Brand	Yaesu
Model	FTA-250L
Category	Transceiver
Language	English