Yaesu FTA-550 Pro-X User Manual

FTA-750/FTA-550 OperATing MAnuAl
55
scannIng operatIon
The
FTA-750/FTA-550
allow you to scan active chan-
nels automatically in the COMM (COM band), MR, and
WX modes. It pauses on signals encountered, so you can
talk to the station(s) on that frequency if you like.
Scanning All Channels
1. Set the radio to the COMM mode.
2.
Press the
[
MENU
]
key to display the
MENU
screen .
3. Select
“
FUNC
” on the screen by pressing the
[
◄
]
or
[
►
]
key, and then press the
[
ENT
]
key.
4. Select “
SCAN
” on the
screen by pressing the
[
◄
]
or
[
►
]
key, and
then press the
[
ENT
]
key.
SCAN MEM
DUAL WATCH
SCAN
SPLIT
LOGGER
OFF
OFF
OFF
OFF
OFF
FUNCTION
The scanning starts and the display returns to the
COMM mode screen.

The scanner searches signals from the lower fre-
quency to higher.

When the scanner encounters a signal, the scanning
pauses and the radio remains on that channel until
the signal disappears, and the frequency indication
on the display blinks.

After the signal disappears, the scanning resumes.

To stop the scanning,
press the
PTT
switch,
or select “
SCAN
” again
in the
FUNCTION
menu.
SCAN MEM
DUAL WATCH
SCAN
SPLIT
LOGGER
OFF
OFF
ON
OFF
OFF
FUNCTION
Next time the scanning is activated, the search will
start from the frequency at which the scanning was
stopped last time.

Yaesu FTA-550 Pro-X Specifications

General

Brand	Yaesu
Model	FTA-550 Pro-X
Category	Transceiver
Language	English