En 113
■ Network Name
Edits the network name (the unit’s name on the network) displayed on other network
devices.
■ Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
Bluetooth
Configures the
Bluetooth
settings.
■ Bluetooth
Enables/disables the
Bluetooth
function (p.66).
Settings
■ Bluetooth Standby
Selects whether to enable/disable the function that turns on the unit from
Bluetooth
devices (
Bluetooth
standby). If this function is set to “On”, the unit automatically turns
on when a connect operation is performed on the
Bluetooth
device.
Settings
• This setting is not available when “Network Standby” (p.112) is set to “Off”.
Off Disables the
Bluetooth
function.
On
Enables the
Bluetooth
function.
Off Disables the
Bluetooth
standby function.
On
Enables the
Bluetooth
standby function.
(The unit consumes more power than when “Off” is selected.)
To Next Page
Loading...
Need help?
General