EasyManuals Logo

Yamaha AVENTAGE RX-A750 User Manual

Yamaha AVENTAGE RX-A750
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
En 116
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
Memory Guard
Prevents accidental changes to the settings.
Settings
When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
ECO
Configures the power supply settings.
Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit or if
no input signals are detected for the specified time, the unit will automatically go into
standby mode.
Settings
Default
U.K. and Europe models: 20 Minutes
Other models: Off
Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the
front display.
Target Zone
Main
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of the main zone.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in the main zone.
Zone2
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in Zone2.
All
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of the main zone or Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in the main zone or Zone2.
Off
Does not protect the settings.
On Protects the settings until “Off” is selected.
Icon
Off Does not set the unit to standby mode automatically.
20 Minutes
Sets the unit to standby mode when you have not operated the unit
and no input signals are detected for 20 minutes.
2 Hours, 4 Hours,
8 Hours, 12 Hours
Sets the unit to standby mode when you have not operated the unit for
the specified time. For example, when “2 Hours” is selected, the unit
will switch to standby mode if you do not operate it for 2 hours.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha AVENTAGE RX-A750 and is the answer not in the manual?

Yamaha AVENTAGE RX-A750 Specifications

General IconGeneral
BrandYamaha
ModelAVENTAGE RX-A750
CategoryReceiver
LanguageEnglish

Related product manuals