EasyManuals Logo

Yamaha MT-07 2016 User Manual

Yamaha MT-07 2016
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Instrument and control functions
3-21
3
EAU59981
Helmet holding cable
A helmet holding cable is located on
the bottom of the passenger seat. Use
this cable in conjunction with the
screwdriver to secure a helmet to the
vehicle.
To secure a helmet with the helmet
holding cable
1. Remove the passenger seat. (See
page 3-19.)
2. Remove the screwdriver from its
holders on the passenger seat,
and then remove the helmet hold-
ing cable from the screwdriver.
TIP
When removing the screwdriver, slide
the screwdriver toward the ” mark
on the passenger seat.
3. Pass the helmet holding cable
through the buckle on the helmet
strap.
4. Hook the cable loops over the
screwdriver, install the screw-
driver by first inserting the screw-
driver into the holder with the
mark, and then slide the screw-
driver toward the holder with
the ” mark.
TIP
Make sure that the screwdriver is se-
curely positioned between its holders,
and then position the cable loops to-
ward the middle of the screwdriver be-
fore installing the passenger seat.
5. Install the passenger seat.
WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
[EWA10162]
1. Passenger seat
2. Helmet holding cable
3. Screwdriver
1. Screwdriver
2. ” mark
3. ” mark
1. Helmet
2. Helmet holding cable
3. Screwdriver
4. Holder
UBU2E0E0.book Page 21 Friday, September 9, 2016 9:23 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha MT-07 2016 and is the answer not in the manual?

Yamaha MT-07 2016 Specifications

General IconGeneral
Displacement689 cc
Bore x Stroke80.0 mm x 68.6 mm
Compression Ratio11.5:1
Maximum Power55.0 kW (74.8 PS) @ 9, 000 rpm
Maximum Torque68.0 Nm (6.9 kg-m) @ 6, 500 rpm
Fuel SystemFuel Injection
Ignition SystemTCI
TransmissionConstant mesh, 6-speed
Final DriveChain
Front SuspensionTelescopic forks
Front BrakeHydraulic dual disc, Ø 282 mm
Rear BrakeHydraulic single disc, Ø 245 mm
Front Tire120/70 ZR17 M/C (58W)
Rear Tire180/55 ZR17 M/C (73W)
Overall Length2, 085 mm
Overall Width745 mm
Overall Height1, 090 mm
Seat Height805 mm
Wheelbase1, 400 mm
Minimum Ground Clearance140 mm
Wet Weight179 kg
Fuel Tank Capacity14 L
Engine TypeLiquid-cooled, 4-stroke, DOHC, 4-valve
Rear SuspensionSwingarm, (link suspension)

Related product manuals