Yamaha MT-07 2016 User Manual

Periodic maintenance and adjustment
6-2
6
EAU59910
Owner’s tool kit
The owner’s tool kit is located under
the passenger seat. Some tools are
also located on the bottom of the pas-
senger seat. (See page 3-19.)
The service information included in this
manual and the tools provided in the
owner’s tool kit are intended to assist
you in the performance of preventive
maintenance and minor repairs. How-
ever, additional tools such as a torque
wrench may be necessary to perform
certain maintenance work correctly.
TIP
If you do not have the tools or experi-
ence required for a particular job, have
a Yamaha dealer perform it for you.
1. Owner’s tool kit
1
UBU2E0E0.book Page 2 Friday, September 9, 2016 9:23 AM

Yamaha MT-07 2016 Specifications

General

Displacement	689 cc
Bore x Stroke	80.0 mm x 68.6 mm
Compression Ratio	11.5:1
Maximum Power	55.0 kW (74.8 PS) @ 9, 000 rpm
Maximum Torque	68.0 Nm (6.9 kg-m) @ 6, 500 rpm
Fuel System	Fuel Injection
Ignition System	TCI
Transmission	Constant mesh, 6-speed
Final Drive	Chain
Front Suspension	Telescopic forks
Front Brake	Hydraulic dual disc, Ø 282 mm
Rear Brake	Hydraulic single disc, Ø 245 mm
Front Tire	120/70 ZR17 M/C (58W)
Rear Tire	180/55 ZR17 M/C (73W)
Overall Length	2, 085 mm
Overall Width	745 mm
Overall Height	1, 090 mm
Seat Height	805 mm
Wheelbase	1, 400 mm
Minimum Ground Clearance	140 mm
Wet Weight	179 kg
Fuel Tank Capacity	14 L
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-valve
Rear Suspension	Swingarm, (link suspension)

Summary

Safety Information

Responsible Ownership and Safe Riding Practices

Owner's duties, safe operation, pre-ride checks, and riding techniques for safety.

Essential Protective Apparel

Guidelines on wearing helmets, jackets, gloves, and other protective gear.

Operational Safety Precautions

Description of Motorcycle Components

Instrument and Control Functions

Immobilizer System and Steering Lock

Indicator Lights and Warning Signals

Multi-function Meter Unit Operation

Handlebar Controls and Levers

Pre-Operation Checks and Riding Procedures

Essential Pre-Ride Inspection Checklist

Key items to check before riding: fuel, oil, coolant, brakes, tires, etc.

Starting Engine and Riding Basics

Periodic Maintenance and Adjustment

Maintenance Schedules and Tool Kit

Overview of maintenance intervals, tool kit contents, and general service advice.

Component-Specific Maintenance Procedures

Troubleshooting Common Issues

Diagnostic charts for starting problems, poor performance, and engine overheating.