EasyManuals Logo

Yamaha MT-07 2016 User Manual

Yamaha MT-07 2016
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
Periodic maintenance and adjustment
6-16
6
12. Install the coolant reservoir cap.
13. Install the radiator cap.
14. Start the engine, let it idle for sev-
eral minutes, and then turn it off.
15. Remove the radiator cap to check
the coolant level in the radiator. If
necessary, add sufficient coolant
until it reaches the top of the radi-
ator, and then install the radiator
cap and radiator cap retaining
bolt.
16. Check the coolant level in the res-
ervoir. If necessary, remove the
coolant reservoir cap, add coolant
to the maximum level mark, and
then install the cap.
17. Start the engine, and then check
the vehicle for coolant leakage. If
coolant is leaking, have a Yamaha
dealer check the cooling system.
EAU60451
Replacing the air filter ele-
ment and cleaning the check
hose
The air filter element should be re-
placed at the intervals specified in the
periodic maintenance and lubrication
chart. Have a Yamaha dealer replace
the air filter element more frequently if
you are riding in unusually wet or dusty
areas. However, the air filter check
hose can be easily reached and should
be frequently checked and cleaned if
necessary.
To clean the air filter check hose
1. Remove the air filter check hose
under the air filter case.
Antifreeze/water mixture ratio:
1:1
Recommended antifreeze:
High-quality ethylene glycol anti-
freeze containing corrosion inhibi-
tors for aluminum engines
Coolant quantity:
Radiator (including all routes):
1.60 L (1.69 US qt, 1.41 Imp.qt)
Coolant reservoir (up to the maxi-
mum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
1. Air filter check hose
UBU2E0E0.book Page 16 Friday, September 9, 2016 9:23 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha MT-07 2016 and is the answer not in the manual?

Yamaha MT-07 2016 Specifications

General IconGeneral
Displacement689 cc
Bore x Stroke80.0 mm x 68.6 mm
Compression Ratio11.5:1
Maximum Power55.0 kW (74.8 PS) @ 9, 000 rpm
Maximum Torque68.0 Nm (6.9 kg-m) @ 6, 500 rpm
Fuel SystemFuel Injection
Ignition SystemTCI
TransmissionConstant mesh, 6-speed
Final DriveChain
Front SuspensionTelescopic forks
Front BrakeHydraulic dual disc, Ø 282 mm
Rear BrakeHydraulic single disc, Ø 245 mm
Front Tire120/70 ZR17 M/C (58W)
Rear Tire180/55 ZR17 M/C (73W)
Overall Length2, 085 mm
Overall Width745 mm
Overall Height1, 090 mm
Seat Height805 mm
Wheelbase1, 400 mm
Minimum Ground Clearance140 mm
Wet Weight179 kg
Fuel Tank Capacity14 L
Engine TypeLiquid-cooled, 4-stroke, DOHC, 4-valve
Rear SuspensionSwingarm, (link suspension)

Related product manuals