Instrument and control functions
3-22
3
To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Remove the screwdriver, then re-
move the helmet holding cable
from the helmet.
3. Store the cable under the seat by
hooking the cable loops over the
screwdriver, install the screw-
driver in its original position, and
then hook the helmet holding ca-
ble over the hook on the bottom of
the passenger seat.
4. Install the passenger seat.
EAU14465
Storage compartment
The storage compartment is located
under the passenger seat. (See page
3-19.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When wash-
ing the vehicle, be careful not to let any
water enter the storage compartment.
EWA10962
Do not exceed the load limit of
1.5 kg (3 lb) for the storage com-
partment.
Do not exceed the maximum
load of 173 kg (381 lb) for the ve-
hicle.
1. Screwdriver
2. Helmet holding cable
3. Hook
1. Storage compartment
UBU2E0E0.book Page 22 Friday, September 9, 2016 9:23 AM
To Next Page
Loading...
