20
P-120/P-120S
Reverb
To select a reverb type press the [REVERB] button a few times until
the indicator corresponding to the desired type lights (the indicators
light in sequence each time the [REVERB] button is pressed). No
reverb is produced when all indicators are off.
OFF
No reverb effect is selected when no REVERB indicator is lit.
ROOM
This setting add a continuous reverb effect to the sound that is similar to
the type of acoustic reverberation you would hear in a room.
HALL 1
For a “bigger” reverb sound, use the HALL 1 setting. This effect simu-
lates the natural reverberation of a small-size concert hall.
HALL 2
For a really spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
STAGE
A simulation of the type of reverb produced in a stage environment.
• The default reverb type (including OFF) and depth settings are different
for each voice.
• Even if the REVERB effect is OFF, a “Soundboard Reverb” effect will be
applied when either the GRAND PIANO 1 or 2 voice is selected.
Adjusting Reverb Depth......................................
Adjust the reverb depth for the selected voice by using the [–/
NO▼] and [+/YES▲] buttons while holding the [REVERB]
button. The depth range is from 0 through 20 (the current depth
setting appears on the LED display while the [REVERB] button
is held). A setting of “0” produces no effect, while a setting of
“20” produces maximum reverb depth. Press the [–/NO▼] and
[+/YES▲] buttons simultaneously while holding the [REVERB]
button to recall the default setting for the current voice (default
depth settings are different for each voice).
The [REVERB] button selects a number of digital reverb effects that you can
use for extra depth and expressive power.
NOTE
18
To Next Page
Loading...
Need help?
General
