Yamaha P-120 P-120S User Manual

21
P-120/P-120S
19
The Effect
To select an effect type press the [EFFECT] button a few times until
the indicator corresponding to the desired type lights (the indicators
light in sequence each time the [EFFECT] button is pressed). No effect
is produced when all indicators are off.
OFF
No effect is selected when no EFFECT indicator is lit.
CHORUS
Shimmering, broadening effect
PHASER
Adds a sweeping effect to the sound.
TREMOLO
Tremolo effect
DELAY
Echo effect
• The default effect type (including OFF) and depth settings are different for
each voice.
Adjusting Effect Depth........................................
Effect depth can be individually adjusted for the selected voice
by using the [–/NO▼] and [+/YES▲] buttons while holding the
[EFFECT] button. The depth range is from 0 through 20 (the
current depth setting appears on the LED display while the
[EFFECT] button is held). A setting of “0” produces no effect,
while a setting of “20” produces maximum effect depth. Press the
[–/NO▼] and [+/YES▲] buttons simultaneously while holding
the [EFFECT] button to recall the default setting for the current
voice (the default depth settings are different for each voice).
The [EFFECT] button allows you to select one of the effects that can give your
sound greater depth and animation.
NOTE

Yamaha P-120 P-120S Specifications

General

Type	Digital Piano
Voices	14
Polyphony	64
Sound Engine	AWM (Advanced Wave Memory)
Effects	Reverb, Chorus
Connectivity	MIDI (In/Out), Sustain Pedal
Speakers	12cm x 2
Included Accessories	Music Rest
Keyboard	88-key Graded Hammer Effect (GHE)