Yamaha P-120 P-120S User Manual

The Function Mode
40
P-120/P-120S
38
After selecting “F9.Y”, press the [+/YES▲] button to engage the backup function sub-mode, then
use the [TEMPO/FUNCTION# ▼, ▲] buttons to select the desired backup function, as listed
below.
• The backup settings themselves, and the contents of the user song recorder memory, are always backed up.
• Even if the Backup is turned on, factory presets can be recalled at any time (see page 44). The factory setting
list is found on page 49.
Even if backup is turned on via one of the functions described below, the data will only be retained
in memory for about 1 week if the power is not turned on during this time. If the backup period is
exceeded, all settings will be reset to their default values. If you want to retain the backup settings for
longer periods, be sure to turn the power switch on for a few minutes at least once a week.
F9.1: Voice........................................................................................................
Turns backup of the voice functions listed below on or off. Use the [–/NO▼] and [+/YES▲] but-
tons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• Voice (Keyboard, Dual, and Split)
• Dual (ON/OFF, Voice, and Dual Functions for each voice combination)
• Split (ON/OFF, Voice, and Split Functions for each voice combination)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
• Variation (for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume)
• Preset Song Part Cancel Volume
F9.2: MIDI .........................................................................................................
Turns backup of the MIDI functions listed below on or off. Use the [–/NO▼] and [+/YES▲] but-
tons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• Channel (Transmit, Receive) • Local ON/OFF
• Program Change ON/OFF • Control Change ON/OFF
• MIDI Transmit Transpose
F9.3: Tuning......................................................................................................
Turns backup of the tuning functions listed below on or off. Use the [–/NO▼] and [+/YES▲] but-
tons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• Transpose • Tuning • Scale (including base note)
F9.4: Pedal .......................................................................................................
Turns backup of the pedal functions listed below on or off. Use the [–/NO▼] and [+/YES▲] but-
tons to turn backup “On” or “OFF”.
The default backup mode is “OFF”.
• AUX PEDAL Mode • Sustain Sample Depth • Soft Pedal Effect Depth
• SUSTAIN PEDAL Type • AUX PEDAL Type
F9: Backup Functions _____________________________
_
NOTE

Yamaha P-120 P-120S Specifications

General

Type	Digital Piano
Voices	14
Polyphony	64
Sound Engine	AWM (Advanced Wave Memory)
Effects	Reverb, Chorus
Connectivity	MIDI (In/Out), Sustain Pedal
Speakers	12cm x 2
Included Accessories	Music Rest
Keyboard	88-key Graded Hammer Effect (GHE)