Yamaha RM1x User Manual

RM1x SEQUENCE REMIXER 15
❏ Floppy disk drive
1. Floppy disk slot
This is where floppy disks are inserted for loading or saving data. 3.5 inch 2HD (MF2HD) or 2DD (MF2DD) floppy disks
can be used. (page 42)
2. Disk-in-use indicator
This indicator will light while data is being read from or written to the floppy disk. Never attempt to remove the disk while
this indicator is lit.
3. Eject button
Press this button to remove the floppy disk. Disks must be inserted or removed gently and firmly, and only while the access
indicator is dark.
1. Floppy disk slot
2. Disk-in-use
indicator
3. Eject button
n The back of a floppy disk contains a write protect tab as shown in the following illustration. When this tab is in the downward
position (with the window open), it will not be possible to modify, add, or delete data. When you wish to protect important data, you
should leave the tab in this position.
Write protect tab
Write permit
Write prohibit
CAUTION !
Be aware that Yamaha can make no guarantee regarding data damage that results from improper use.
SETUP

Yamaha RM1x Specifications

General

Type	Groovebox
Polyphony	32 voices
Effects	Reverb, Chorus, Variation
MIDI	In/Out/Thru
Display	Backlit LCD
Synthesis Method	AWM2 (Advanced Wave Memory 2)
Multitimbral	16 parts
Songs	20
Arpeggiator	Yes
Inputs	Footswitch
Tracks	16
Power Supply	AC adapter
Sequencer Resolution	480 ppq
Outputs	Stereo Out, Headphone Out
Storage	3.5 inch floppy disk