62 RM1x SEQUENCE REMIXER
PATTERN MODE
6. Arpeggio
6. Arpeggio
This submode can be used to create simple automatic arpeggios based on notes played on the RM1x keyboard.
❏ Arpeggio Setting
Track number
Transpose
OFF, UP, DOWN, ALTER1,
ALTER2, RANDOM
Parameter Values Function
Type Specifies the arpeggio type.
Normally the arpeggio will play based on the order in which the
keys are pressed. But when the SORT parameter (below) is “ON,”
the arpeggio will play according to the selected TYPE regardless of
the order in which the keys are pressed.
“UP” produces an ascending arpeggio. “DOWN” produces a descend-
ing arpeggio. “ALTER1” and “ALTER2” produce different types of
alternating arpeggio. And “RANDOM” produces a random arpeg-
gio.
Sort ON, OFF Determines whether the arpeggio notes will or will not be “sorted”
according to the selected arpeggio TYPE (above).
Hold ON, OFF Determines whether the arpeggio will continue to play when the
notes are released or not.
When this parameter is “ON,” the arpeggio will continue to play when
the notes played on the RM1x keyboard or an external keyboard
are released. When “OFF” the arpeggio will stop as soon as the
notes are released.
Octave range 1 ... 4 Specifies the range of octaves the arpeggio will cover. When set to
“1,” the arpeggio will include only the notes played on the keyboard.
When set to “2,” “3,” or “4,” the arpeggio will be automatically ex-
tended to cover the specified number of octaves.
Track number 01 ... 16 Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
Transpose -36 ... +36 Shows the current transpose value. Transposition can be accom-
plished via this parameter, or by the keyboard method described on
page 27.
* For information about how to change values, refer to the Basic Operation (page26).
To Next Page
Loading...
Need help?
General
