60
11. ACCESSORY OPTIONS
Accessory Item List
Clean Ovens DE411/61, DT411/611 are compatible with a wide variety of available options as shown in
Tables 11.1. and 11.2.
Options listed in Table 11.2 are required to be installed at theYamato manufacturing facility.
Table 11.1 List of Options (factory installation not required)
Chamber Rack
(stainless steel wire)
with supports
Same as standard racks; available for
additional purchase.
Chamber Rack
(perforated stainless
steel) with supports
Load capacity:
approx. 30kg/rack
Perforated stainless steel chamber
Basket Style Rack
Containter (stainless
steel mesh)
Load capacity:
approx.15kg/container
30mm deep rack container constructed
from stainless steel mesh (3 mesh
panels); for processing smaller
samples/specimens.
Designed to be stacked on standard
stainless steel wire racks.
Additional temperature sensor for
confirming temperature in chamber or
temperature of samples.
May be connected to optional memory
recorder.
Silicon Plug (for 1
opening)
Silicon rubber plug for sealing gaps
caused by sensors inserted through
cable port.
Table 11.2 List of Options (factory installation required)
Remote Communications
Terminal (RS485)
Terminal installed on main unit for
controlling and monitoring
operation status from remote PC
workstation.
Remote Communications
Adaptor Kit
Adapter kit for connecting unit to
remote PC workstation.
Option ODH44 required.
Software supplied with kit.
Temperature Output
Terminal (4-20mA)
Terminal outputting a 4 – 20 milli
ampere analog signal for external
temperature sensor.
External Alarm Output
Terminal
Terminal allowing alarm signals
accompanying unit errors to be
output externally.
To Next Page
Loading...
Need help?
General
