6 Keypad
EN 6 YASKAWA ELECTRIC TOEP C710617 17B YASKAWA AC Drive GA700 Initial Steps
6 Keypad
Figure 6.1 Keypad
Table 6.1 Keypad: Names and Functions
- Name Functions
A
RUN LED
Illuminates to show that the drive is operating the motor.
The light turns off when the drive stops.
Flashes to show that the drive:
• Is decelerating to stop, or
• Received a Run command, but the frequency reference is 0 Hz.
Flashes quickly to show that the drive:
• Received a Run command from the MFDI terminals and is switching to REMOTE Mode while the
drive is in LOCAL Mode.
• Received a Run command from the MFDI terminals when the drive is not in Drive Mode.
• Received a Fast Stop command.
• Output is shut off from the safety function.
• Is operating in REMOTE Mode, and the user pushed on the keypad.
• Is energized with an active Run command and b1-17 = 0 [Run Command at Power Up = Disregard
Existing RUN Command].
B
ALM LED
Illuminates when the drive detects a fault.
Flashes when the drive detects:
• An alarm
• An oPE parameter setting error
• A fault or error during Auto-Tuning.
The light turns off during regular drive operation without alarms or faults.
C
microSD Card
Insertion Slot
The insertion point for a microSD card.
D
Function Keys
F1, F2, F3
The menu shown on the keypad sets the functions for , , and .
The name of each function is in the lower half of the display window.
To Next Page
Loading...
Need help?
General