Enterprise IP Phone Customizing Your Phone
To adjust the volume via Phone interface:
1) Press Menu->Settings->Basic Settings->Enter.
2) Scroll to Phone Volume->Ring Volume, use the Volume Adjustment Bar or
navigation keys to adjust the volume.
3) Press OK softkey to save the change or Back softkey to cancel.
You can also adjust the ring tone volume by the following way:
When the phone is in idle status, press the Volume Adjustment Bar to a comfortable
level.
To change the Ring Tone Type via Web interface:
Choose Phone->Preference->Ring Tone, highlight the specific one in the scroll-down
menu, choose confirm button to update the change. You can also delete the specific one
by choose Delete button.
To update the new Ring Tone via Web interface:
1) Choose Browse button to choose the specific ring tone file.
2) Choose Upload button to upload the file, and then Confirm to save the change.
Note:
The ring tone file format must be in 16bits WAV format (via Ulaw Compression), 8K
sample rate (monophony). Blank or other special characters can not be included in the
file name.
Codec Selection
The IP phone supports the following voice codecs:
G.722, G.711, G.723.1, G.726, G.729AB, iLBC and GSM.
You can enable/disable the desired codecs via Web interface. Please contact your
System Administrator for more details about the codecs.
To enable/disable the codecs:
1) Choose Account->Account X (X means Account number) ->Codecs.
- 15 -