EasyManuals Logo
Home>Yealink>IP Phone>SIP-T22P

Yealink SIP-T22P User Manual

Yealink SIP-T22P
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Enterprise IP Phone Getting Started
Note:
1. If inline power is provided, do not install AC adapter. Make sure the Ethernet cable
and switch/hub are PoE compliant.
2. The Internet Port can be also connected to Hub/Switch/IP PBX or other internet
devices.
The phone can also share the network connection with other network devices such as
PC. Connect the phone’s PC port and computer’s Network Port together using an
Ethernet cable, shown as below:
Configuration and Registration
If you are administrator, you need to do some simple configuration to make the phone
work. If not, please contact your internet administrator or service provider for more
details.
Configuring via Web Page
Press OK button on the keypad of the phone to enter the status page and find out the
IP address of IP phone. Enter it (for example
http://192.168.3.35) into the address bar
of web browser. The default login name and password are both “admin”.
Note:
Please locate your PC in the same network segment of IP phone (192.168.3.X) to
access the web configuration page. Please consult your system administrator for help.
Network Settings
Choose Network->Internet Port.
DHCP: By default the phone attempts to contact a DHCP Server in your network in
order to obtain its valid network settings, e.g. IP address, sub mask, gateway, DNS
server, etc.
Static IP Address: If your phone cannot contact a DHCP Server for any reason, you
need to enter the network settings manually via Static IP Address. Please contact your
internet administrator for more details.
- 4 -

Other manuals for Yealink SIP-T22P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T22P and is the answer not in the manual?

Yealink SIP-T22P Specifications

General IconGeneral
DC-in jackYes
Expansion module supportNo
Ethernet LAN (RJ-45) ports2
Volume controlDigital
Keypad number of keys32
Number of handles included1 pc(s)
Power requirements100 - 240 VAC, 5 VDC
Power consumption (typical)2.6 W
Power consumption (PowerSave)1.5 W
Voice codecsG.722, G.723, G.726
Touchscreen-
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity300 entries
Number of VoIP accounts3
Security algorithmsHTTPS, SRTP
Flash memory8 MB
Internal memory32 MB
Password protection typeUser
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals