Yealink SIP-T22P User Manual

Enterprise IP Phone Using the Basic Call Functions
During the conversation, you can alternate between Headset, Handset and Speaker
phone by pressing the corresponding buttons or picking up the handset.
Denying an incoming call
Press Reject softkey to deny the incoming call directly.
DND
Press DND softkey to active DND Mode. Further incoming calls will be rejected and the
display shows:
icon. Press DND softkey twice to deactivate DND mode. You can
find the incoming call record in the Call History.
Call Forward
This feature allows you to forward an incoming call to another phone number e.g. a cell
phone or voice mailbox. The display shows
icon.
The following call forwarding events can be configured:
z Off: Call forwarding is deactivated by default.
z Always: Incoming calls are immediately forwarded.
z Busy: Incoming calls are immediately forwarded when the phone is busy.
z No Answer: Incoming calls are forwarded when the phone is not answered after a
specific period.
z Busy/No Answer: Incoming calls are forwarded no matter the phone is busy or not
answered.
To configure Call Forward via Phone interface:
1) Press the following softkeys: Menu->Features->Enter->Call Forward->Enter.
2) There are 5 options: Always Forward, Busy Forward, No Answer Forward, Busy/No
Answer Forward and Cancel Forward.
3) If you choose one of them (except Cancel Forward), enter the phone number you
want to forward your calls to. Press Save softkey to save the changes.
- 23 -

Yealink SIP-T22P Specifications

General

DC-in jack	Yes
Expansion module support	No
Ethernet LAN (RJ-45) ports	2
Volume control	Digital
Keypad number of keys	32
Number of handles included	1 pc(s)
Power requirements	100 - 240 VAC, 5 VDC
Power consumption (typical)	2.6 W
Power consumption (PowerSave)	1.5 W
Voice codecs	G.722, G.723, G.726
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	300 entries
Number of VoIP accounts	3
Security algorithms	HTTPS, SRTP
Flash memory	8 MB
Internal memory	32 MB
Password protection type	User
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g