Yealink SIP-T22P User Manual

Enterprise IP Phone Using the Advanced Phone Functions
the list.
2) Press Confirm button to save the changes.
Group Pickup
When you configure a Group Pickup key, you specify the extension that you want to
monitor. Then, when the monitored extension receives a call, you press the key to pick
up the call. If the monitored extension receives multiple incoming calls simultaneously,
the IP Phone UI displays a list of incoming calls. You select a call from this list to start
the conversation.
To assign the key as Group Pickup:
1) Choose Phone->DSS Key ->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Group Pickup
from the list.
2) In the "Line" field, select a line for which to apply this key, and enter the extension
number you want to pickup.
3) Press Confirm button to save the changes.
Call Park
Call Park is a feature that allows a person to put a call on hold at one telephone set and
continue the conversation from any other telephone set.
The “call park” feature is activated by pressing a preprogrammed button or a special
sequence of buttons. This transfers the current conversation to an unused
extension
number
and immediately puts the conversation on hold. The telephone system will then
display the extension number of the parked call so that the call can later be retrieved.
To assign the key as Call Park:
1) Choose Phone->DSS Key ->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Call Park from the
list.
2) In the "Line" field, select a line for which to apply this key, and enter the extension
number you want to park.
3) Press Confirm button to save the changes.
Group Listening
When the key is configured as Group Listening key, you are allowed to enable the
Speakerphone and Handset/Headset mode at the same time. It is suitable for the group
conversation which has more than one person at one side. You are able to speak and
listen using handset/headset; meanwhile the others near by can speak and listen using
speakerphone. You can get back to the previous mode by pressing the key again.
- 41 -

Yealink SIP-T22P Specifications

General

DC-in jack	Yes
Expansion module support	No
Ethernet LAN (RJ-45) ports	2
Volume control	Digital
Keypad number of keys	32
Number of handles included	1 pc(s)
Power requirements	100 - 240 VAC, 5 VDC
Power consumption (typical)	2.6 W
Power consumption (PowerSave)	1.5 W
Voice codecs	G.722, G.723, G.726
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	300 entries
Number of VoIP accounts	3
Security algorithms	HTTPS, SRTP
Flash memory	8 MB
Internal memory	32 MB
Password protection type	User
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g