Yealink SIP-T4 Series Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 60 OF 150
5.2.2.2.2.3 Static Files
Static files are files such as firmware and media files that are not configurable and/or do
not make use of the dynamic BroadWorks Device Management tags. The Yealink T4x
requires the following static files:
 <firmware-version>.rom
 Ring1.wav
 000.GUI.English.lang (GUI/WEB)
 AutoDST.xml
 config.bin
 contact_group_list.xml
 contact_list.xml
 DialPlan.xml
 DialNow.xml
 CallFailed.xml
 CallIn.xml
 Dialing.xml
 Connecting.xml
 RingBack.xml
 Talking.xml
 super_search.xml
 favorite_setting.xml
 WebItemsLevel.cfg
Add the static files to the device profile type with the settings shown in Figure 33 Static
File Settings.
After creating the device profile type file, upload static files (extracted from the CPE kit and
obtained from Yealink). Use the Browse button on the file definition screen. Be sure to
click Apply after uploading the file.

Yealink SIP-T4 Series Specifications

General

Brand	Yealink
Model	SIP-T4 Series
Category	Telephone
Language	English