Configuring Basic Features
383
To configure call waiting and call waiting tone via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press or , or the Switch soft key to select the desired value from the Call
Waiting field.
3. Press or , or the Switch soft key to select the desired value from the Play Tone
field.
4. (Optional.) Enter the call waiting on code in the On Code field.
5. (Optional.) Enter the call waiting off code in the Off Code field.
6. Press the Save soft key to accept the change.
Auto Redial
Auto redial allows IP phones to redial a busy number after the first attempt. Both the number of
attempts and waiting time between redials are configurable.
Procedure
Auto redial can be configured using the following methods.
Description:
Enables or disables the IP phone to automatically redial the dialed number when the callee
is temporarily unavailable.
0-Disabled
1-Enabled
To Next Page
Loading...
Need help?
General
Weight and Dimensions
