Introduction
v
Introduction
About This Guide
Yealink administrator guide is intended for administrators who need to properly configure,
customize, manage, and troubleshoot the IP phone system rather than end-users. This guide
will help you understand the Voice over Internet Protocol (VoIP) network and Session Initiation
Protocol (SIP) components, and provides descriptions of all available phone features.
This guide describes three methods for configuring IP phones: central provisioning, web user
interface and phone user interface. It will help you perform the following tasks:
Configure your IP phone on a provisioning server
Configure your phone’s features and functions via web/phone user interface
Troubleshoot some common phone issues
Many of the features described in this guide involve network settings, which could affect the IP
phone’s performance in the network. So an understanding of IP networking and a prior
knowledge of IP telephony concepts are necessary.
The information detailed in this guide is applicable to firmware version 81 or higher. The
firmware format is like x.x.x.x.rom. The second x from left must be greater than or equal to 81
(e.g., the firmware version of SIP-T46G IP phone: 28.81.0.20.rom).
See the
Yealink Products Regulatory Notices guide
for all regulatory and safety guidance.
Chapters in This Guide
This administrator guide includes the following chapters:
Chapter 1, “Product Overview” describes the SIP IP phones and expansion modules.
Chapter 2, “Getting Started” describes how Yealink phones fit in your network and how to
install and connect IP phones, and also gives you an overview of IP phone’s initialization
process.
Chapter 3, “Setting Up Your System” describes some essential information on how to set
up your phone network and set up your phone with a provisioning server.
Chapter 4, “Configuring Basic Features” describes how to configure the basic features on
IP phones.
Chapter 5, “Configuring Advanced Features” describes how to configure the advanced
features on IP phones.
Chapter 6, “Configuring Audio Features” describes how to configure the audio features on
IP phones.
Chapter 7, “Configuring Security Features” describes how to configure the security
To Next Page
Loading...
Need help?
General
Weight and Dimensions
